Undercut In-Line Router
It is used the gripper for PCB gripping, so no need to produce jig by model. And cutting PCB on the conveyor with 3~4 grip fingers grip it stably.
Bottom Cutting Router
PCB is gripped by upper and cutting by bottom, it is free for component high on the PCB.
High Capacity 500W Spindle
It is cutting PCB stably with strong power as 500W spindle motor which is made in Germany.
Vision system is standard installation for camera teaching and able to revise data after fiducial check.
Auto Conveyer Width Adjustment
It is saved model changing time by using motor to save the parameters of width pitch.
It is the most compact design for securing customer space.
Bit Broken & Slip Down Detection
Bit detection sensor is standard installation for sounded alarm when bit broken & slip down.
Multi-Bit Function & Life Time Management
It is using multi-bit by 2~3 level for reducing consumable cost of customer and sounding alarm when bit is on each level by life time management.
It is standard installation for protected PCB and efficient removing dust (area ionizing type).
Gripper is able to rotate 90 or 180 degree. For unloading, it is able to rotate in depending PCB fixing and releasing way by model.
Easy & Convenient S/W
It is for high visibility and able to make & operate program easy & operating by applied full graphic user interface.
Barcode Interlock & MES
It is used vision system or scanner to read the 1D/2D barcode for MES function with costumer’s network.
Pass/Fail PCB Separation
It is separating and releasing the fail PCB by ng conveyer, after getting data of NG PCB from front equipment by MES.
Edge Detection Function
As powerful vision system function, the both sides PCB edges beside a cutting tab are detected and compensate cutting position by tolerance of boards.
ID Verification with Fingerprint
It is available to be high security user management and easy logging by registered and appreciated user fingerprint.
It is inspecting cutting measure & burr after cutting, and able to implement additional cutting.
CAD/CAM Data Conversion
It is converted CAD/CAM data to routing cutting data then able to do offline programing.
Real-Time Spindle RPM Monitoring
It is protected PCB with sounding alarm when spindle PRM is declining by detecting it in real time.
Auto Tray Function
It is loaded PCB after cutting it to tray or slot box by automatically, also auto changing and stacking tray or slot box when PCB is full in there.
Pallet Transporting System
After cutting PCB, it is released seated on the pallet from costumer.
Shuttle Jig Outlet
It is releasing PCB by seated on the shuttle jig for automation of next equipment.
Auto Tool Changing System (ATC)
When life of bit is almost done or it is broken, it is changed the bit automatically. (Available with 4033 and 4041 spindle only).
Visual Data Log System (Visual Recorder)
It is able to check phenomenon & cause by video recording & saving inside of equipment when issue is happened during it is working.
Real-Time Self-Diagnosis Dust Collector
It is able to do self-diagnosis about pressure, damage & pollution level inside dust collector and sound alarm to router (patent-pending).
Filter+Cyclone Complex Dust Collector
It is able to use filter semi-permanently with applied cyclone, and install plastic bag.
Easy Handling Dust Collector
It is able to use the plastic bag for disposing dust cleanly & easily.
Copyright by MSTECH EMEA, S.L.U. /// Developed by Graphe Disseny